Stainless steel iron remover

The shell of stainless steel iron remover is mainly made of 304, 316 and other excellent quality stainless steel materials. It adopts mirror polishing, wire drawing polishing, sandblasting treatment, etc., which can meet the requirements of food grade and health grade. The use of electromagnetic iron remover requires that the ambient air temperature should not be higher than + 40 ℃ and not lower than - 20 ℃. The equipment should be placed in an environment without explosion danger and corrosive gas, and can be used indoors and outdoors.

Precautions for the use of iron remover:

1. The first use of equipment, do a good job in related installation, commissioning work. Before driving, check whether the clip of suspension wire rope is firm, complete and in good condition. If it is normal, it can be put into use.

2. Relevant operators should be trained, have the ability to operate the equipment, and use the equipment according to the operating procedures.

3. The usual inspection and maintenance of the equipment is to clean the dust around it.

4. In case of any abnormality during the use of the equipment, the equipment shall be shut down for maintenance and inspection in time. At the same time, when repairing the iron remover and control cabinet, the main power supply must be cut off. After troubleshooting, the equipment can be used continuously. Do not operate the equipment with diseases.

5. When the iron remover works, there is a strong magnetic field nearby, so it is not allowed to place instruments around it.

6. Iron remover and its accessories, electrical control cabinet, etc. should be stored indoors to avoid moisture, not in the open air.

Technical parameters: