Special electromagnetic dry powder iron remover for lithium battery materials

一、Technical parameters and type selection：

二、Technical features:

1. Simple connection: during operation, the main engine vibrates. The input and output of raw materials can be connected through the outer pipe or canvas bag.

2. Forced oil cooling system: to ensure the coil temperature rise, so as to stabilize the magnetic field. Secondary water cooling: double cooling system, better cooling effect, adapt to long-time work.

3. Removal of difficult circulation of fine crops: under the action of vibrating motor, raw materials with volume less than 200 microns or high humidity can pass through the screen uniformly.

4. Handling of high temperature materials: standard models can handle raw materials with temperature up to 70 ℃, while special models can handle raw materials with higher temperature.

5. Simple installation: as long as the bracket is safe, the equipment can be installed at will.

6. Easy cleaning of magnetic filter screen: a tray is placed at the outlet of the material to recover the separated material, and the power is turned off at the same time to demagnetize the screen, which is convenient for cleaning.

7. Complete separation of iron powder and basic materials: basic materials will never enter the separation box.

8. It has the function of real-time temperature monitoring and automatic control. When the oil temperature rises to the set value, the system will automatically alarm until it stops, so as to effectively avoid the coil burning due to high temperature rise.

9. The contact part between the whole machine and the material is made of 304 stainless steel to ensure that the material is not polluted.

Magnesium oxide / zinc special electromagnetic iron remover:

1. The capacity of zinc oxide treatment unit is more than 5000 kg / h.

2. The capacity of MgO treatment unit is more than 300kg / h.

3. Magnetic field stepless frequency conversion regulation.

4. Under the condition of guaranteed production capacity, when the content of magnetic material in the feed material is 100 ppb, the content of magnetic material in the discharge material is less than 20 ppb.