Degaussing method of permanent magnet iron remover:

According to the principle of magnetism, as long as the magnetic direction of each molecule is different, it will be demagnetized

The common method is high temperature heating,

Impact will also make it lose magnetism, strong magnetic field can also change its magnetic pole and its magnetic strength, with the size of the alternating current generated by the magnetic field can quickly demagnetize the magnetic body, after demagnetization, the magnet can be magnetized again.

Safety precautions

1. During the operation of the belt type self unloading iron remover, it is strictly forbidden to stay in front of the iron unloading, and it is strictly forbidden to enter any part of the body under the iron unloading chute.

2. When belt conveyor and iron remover are in operation and working state, it is strictly forbidden to unload iron.

3. Never flush the equipment with water.

4. It is strictly forbidden to stand under the iron remover to clean the iron and other debris.

Maintenance

1. Regularly check the tightness of various fasteners and hangers, and check whether the lubrication of the operating mechanism is normal or not; Check the grounding condition of motor power supply; According to the general mechanical and electrical equipment maintenance requirements.

2. Clean the dust on the surface of the iron ware regularly to avoid affecting the operation of the mechanism.

3. Regularly check the self unloading mechanism and wear, and adjust and replace it if necessary.