Permanent magnet iron remover is one of the commonly used equipment in production operation. If the maintenance is not good, it will directly affect the service life of permanent magnet iron remover. The maintenance of permanent magnet iron remover parts is as follows:

1. Pay attention to whether each part of the permanent magnet iron remover works normally. The newly installed tire is easy to loose, so it should be checked frequently.

2. If the bearing temperature rises, the cause should be eliminated immediately.

3. If there is impact sound when the rotating gear is running, it should be stopped immediately for inspection and elimination.

4. Pay attention to check the wear degree of easily worn parts, and always pay attention to replace worn parts of permanent magnet iron remover.

5. When the bearing temperature rises, stop immediately to check the cause, eliminate the movable device on the underframe plane, and let out dust and other things, so as to avoid that the movable bearing cannot move on the underframe when the machine encounters non fragile materials, causing serious accidents.

6. For the overall load of the bearing shoulder machine, the good lubrication in the permanent magnet iron remover has a great relationship with the bearing life, which directly affects the service life and operation rate of the permanent magnet iron remover. The injected lubricating oil is required to be clean and well sealed, especially the main oil injection part of the machine.